| 논문명 |
강도설계용 풍하중 평가를 위한 재현기간과 기본풍속지도의 제안 / Proposal of Return Period and Basic Wind Speed Map to Estimate Wind Loads for Strength Design in Korea |
| 수록사항 |
대한건축학회논문집 구조계, Vol.34 No.02 (2018-02) |
| 주제어 |
강도설계 ; 허용응력설계 ; 변동계수 ; 풍하중계수 ; 재현기간 ; 기대풍속 ; 공칭풍속 ; 확률적 방법 ; 경험적 방법 ; 신뢰성지표 ; Strength Design ; Allowable Stress Design ; Coefficient of Variation ; Wind Load Factor ; Return Period ; Expected Wind Speed ; Specified Wind Speed ; Probabilistic Method ; Empirical Method ; Reliability Index |
| 요약2 |
Strength design wind loads for the wind resistance design of structures shall be evaluated by the product of wind loads calculated based on the basic wind speed with 100 years return period and the wind load factor 1.3 specified in the provisions of load combinations in Korean Building Code (KBC) 2016. It may be sure that the wind load factor 1.3 in KBC(2016) had not been determined by probabilistic method or empirical method using meteorological wind speed data in Korea. In this paper, wind load factors were evaluated by probabilistic method and empirical method. The annual maximum 10 minutes mean wind speed data at 69 meteorological stations during past 40 years from 1973 to 2012 were selected for this evaluation. From the comparison of the results of those two method, it can be found that the mean values of wind load factors calculated both probability based method and empirical based method were similar at all meteorological stations. When target level of reliability index is set up 2.5, the mean value of wind load factors for all regions should be presented about 1.35. When target level of reliability index is set up 3.0, wind load factor should be presented about 1.46. By using the relationship between importance factor(conversion factor for return period) and wind load factor, the return periods for strength design were estimated and expected wind speeds of all regions accounting for strength design were proposed. It can be found that return period to estimate wind loads for strength design should be 500 years and 800 years in according to target level of reliability index 2.5 and 3.0, respectively. The 500 years basic wind speed map for strength design was suggested and it can be used with a wind load factor 1.0. |
